Difference between revisions of "Additional information: Bleaching of vicose, cupro &modal(regenerated)"
m (Protected "Additional information: Bleaching of vicose, cupro &modal(regenerated)" [edit=autoconfirmed:move=autoconfirmed]) |
|||
Line 1: | Line 1: | ||
Back to [[Bleaching of viscose, cupro & modal(regenerated)]] | Back to [[Bleaching of viscose, cupro & modal(regenerated)]] | ||
+ | |||
+ | |||
+ | '''BLEACHING OF CHEMICAL FIBRES''' | ||
Revision as of 10:34, 16 November 2010
Back to Bleaching of viscose, cupro & modal(regenerated)
BLEACHING OF CHEMICAL FIBRES
1. DESCRIPTION OF TECHNIQUES, METHODS AND EQUIPMENT
Chemical fibres usually are already white when bought. However, to achieve full-white, bleaching is necessary. In addition, yellowing can occur after heat-setting.
Both reductive and oxidative bleaching can be applied.
Reductive bleaches:
- sodium dithionite
- sodium- and zinc-formaldehyde
Oxidative bleaches:
- sodium chlorite (except for polyurethane)
NOT suitable for chemical fibres:
- H2O2
- hypochlorite
- potassium permanganate
Chemical fibre bleaching is carried out in full bath, not with steam – as sometimes applied to natural fibres.
continuous bleaching: f.ex. “boot plant” (Stiefel Anlage)
2. NEW TECHNOLOGIES
- a) Changes in the process
No information is available.
- b) Changes in the heat supply system
No information is available.
- c) Changes in the energy distribution system
No information is available.